APLICATIONS
>> Precision workpiece made on an AV35
| Type of wire: | Bare brass |
| Wire diameter: | 0.25 mm |
| Workpiece material: | Steel (X210CrW12) |
| Punch thickness: | 50 mm |
| Strategy: | Roughing + 2 dressing runs |
| Roughness: | 0.63 µm Ra (VDI-16) |
| Verticality: | 2 microns per side |
| Dispersion of measurements on workpiece: | <= 5 microns |
>> Precision part made on an AV35
| Type of wire: | Bare brass |
| Wire diameter: | 0.25 mm |
| Workpiece material: | Steel (X210CrW12) |
| Strategy: | Roughing + 2 dressing runs |
| Roughness: | 0.63 µm Ra (VDI-16) |
| Circularity precision: | <= 5 microns |
>> Hard metal part made on an AV35
| Type of wire: | Bare brass |
| Wire diameter: | 0.25 mm |
| Workpiece material: | Tungsten carbide |
| Workpiece thickness: | 3.51 mm |
| Profile length: | 61 mm |
| Strategy: | Roughing + 2 dressing runs |
| Total time: | 54’ |
| Roughing time: | 24’ |
| Time of 1st dressing run: | 23’ |
| Time of 2nd dressing run: | 8’ |
